Home | Products | Single Girder Crane

Single Girder Crane

Simplex Single Girder EOT Cranes are designed to
IS : 807 & IS : 3177 with suitable factor of safety
as per duty class.

Description

Hoist Unit
Long Travel Drive
Simplex Hoist unit are designed in accordance with IS – 3938 having modular construction suitable to run on I – section or Box girder. Hoist & cross travel motor, gear box, and Brake are easily accessible for maintenance.
Either twin or centrally driven provided depending on span length
Control Equipment
Control Panel
Operated through push button station or remote control.
Each motor is operated by push button thro’ contactors having Control voltage of 24V/110V for safety of operator. Protective panel consisting of overload relay, MCB / Fuses housed in control panel box. Electrical supply shall be AC 3ph, 400/440V, 50HZ.
Test Load
The crane shall be tested at 25% overload of safe working load, Test load are to be arranged by purchaser at site.

Specification

Capacity
Span
Lift
Up to 15 Tones
Up to 25 Mtr
6 Mtrs & Above

Note : The S/G Cranes are designed in accordance with IS: 807, IS: 3938. Suitable factor of safety are considered as per duty class – I, II, III & IV the crane bridge is designed either from Rolled Steel I – Section or fabricated from Plates.End carriage are fabricated from Rolled steel section or from plates & provided with L- type double flanged wheels of suitable dia with spherical roller bearings.